SAWA CLEAN SC-7000CE SPECIFICATION
Any solder paste in the apertures on your stencils? Finely cleaning even residues!
| Operational Merit |
Managerial Merit |
Technical Merit |
|
Simple operation with a foot switch
Effective cleaning time |
Low consumption of solvent
Environmental protection in working without touching solvent |
Removes solder particles in apertures that cannot be taken off by hand-wipe! |
How to use:
- Put the stencil on the attached tray.
- Pour solvent (10~30cc) over the stencil.
- Place the cleaning head directly on the stencil, and run it for 20 seconds. =>Cleaning works finish!! Stencill becomes clean, and solder paste remains on tray.
Usage
- Metal stencil cleaning
- Mesh screen cleaning
- Miss printed PCB cleaning
Specifications
| Model No. |
SC-7000CE |
| Ultrasonic Generator |
W 250 D 345 H 200 mm Weight 13 kg |
| Cleaning head |
W 120 D 185 H 105 mm Weight 2 kg |
| Tray |
W 800 D 800 H 20 mm Weight 6 kg |
| Ultrasonic Output power |
150W Frequency: 40kHz |
| Power Built in transformer |
AC 230V 50/60Hz 320VA AC code 3.0m |
| Connection cable |
Generator to claning head: 3.5m |
| Foot switch Cable: |
3m |
Benefits:
- Ultra Sonic Stencil Cleaning next to the screenprinter
- Low solvent usage, Optimum cleaning results
- Portable and flexible
- Low cost investment, High return on Investment
Comparison
|
|
Sawa SC-7000CE |
Fully automatic cleaners |
|
Product Cost |
Euro 7,000 |
Euro30,000-40,000 |
|
Solvent Type |
IPA, Water, Non-VOC Detergents |
Non-VOC Detergent |
| Solvent Usage (Month) |
3 liters |
80 liters |
| Solvent Cost (Month) |
Euro 300 |
Euro 8000 |
| Sponge Cost (Month) |
Euro 100 |
N/A |
|
Waste Handling & Disposal Cost (Solvent) |
Euro 0 |
Millions |
| Water Evaporation Unit |
N/A |
May be required |
|
Permit for water evaporation unit |
N/A |
May be required |
|
Portable |
Yes |
No |
|
Foot Space |
Minimal |
Large |
|
Able to clean stencils on printer |
Yes |
No |
|
Able to clean no clean and water soluble pastes with minimal change over |
Change Sponge |
May have to change solvent |
|
Manual Labor Required
|
Yes |
Yes-Stencil must be manually wiped prior to application. This reduces solvent contamination. |
|
Cleaning time after manual wiping |
1 minute |
5-20 minutes | |